PMX FLASHING DESIGNER · MADE IN AMERICA

Design custom Head Flashing

Head flashing, drip caps and end-dam profiles for windows, doors and wall openings.

Custom head flashing installed above an exterior window head
Head Flashing — custom formed to your exact dimensions
Head Flashing

Enter exact values at right — the Head Flashing rendering updates instantly. Numeric dimensions are authoritative for fabrication.

CONFIGURE HEAD FLASHING

Head Flashing

Live
Legs & bends
Estimated price$0.00per configured order

Made-to-order head flashing

Custom head flashing is most useful when an off-the-shelf profile cannot match the wall, roof, window or equipment detail in the field. PMX Flashing lets contractors, roofers, builders and facility teams start with a proven profile, enter exact leg dimensions and bend angles, select a material and request fabrication review. The result is a made-to-order sheet-metal component defined around the assembly instead of forcing the assembly to fit a stock part.

Typical applications include window, door and wall openings that require a projecting water-shedding head. Every project should be evaluated as a complete water-management assembly. Dimensions, laps, end conditions, fasteners, sealants, membrane compatibility and drainage direction all influence performance. The online designer creates a clear starting configuration, while final manufacturability and project suitability are confirmed during review.

Available material choices may include galvanized steel, Galvalume, aluminum, stainless steel, copper and pre-finished steel. The right material depends on exposure, expected service life, appearance, contact with adjacent metals, coating requirements and project budget. Gauge and maximum piece length also depend on the material and profile geometry. Hems can stiffen exposed edges; kicks and drips can help release water; end dams can contain water at openings; and carefully selected bend angles can improve fit against sloped or irregular construction.

To measure custom head flashing, sketch the cross-section as it will be installed and number each straight leg in sequence. Record every leg dimension, every bend direction and each included angle. Note which face is exposed, which direction is up, and where water should drain. Measure more than one location on existing construction so variations are discovered before fabrication. For assemblies with corners, penetrations or end returns, identify any separately fabricated accessories required.

PMX fabricates custom sheet metal products for shipment to projects throughout the United States. Use the designer for pricing guidance and a dimensioned configuration, then request a fabrication quote. Production pricing, tolerances, lead time, packaging and freight are confirmed before the order is released.

Head Flashing Types and Styles

Start with one of these common styles, then adjust every dimension for the project condition.

  • Standard Head Flashing
  • Drip Cap
  • Z Head Flashing
  • End-Dam

Ordering and installation planning

Confirm field dimensions and the direction of every bend before ordering. Installation methods must be selected for the substrate, exposure and governing project requirements. PMX supplies the fabricated sheet-metal component; the contractor remains responsible for final detailing, code compliance, waterproofing integration and installation.

Related Products

Your flashing designs

Estimated total$0.00

Final pricing and manufacturability are confirmed during fabrication review.